SPECIFICATIONS
| Capacity | |
|---|---|
| Drilling [C.I.] | 70 |
| Drilling [M.S.] | 60 |
| Boring [M.S.] | 80 |
| Tapping [C.I.] | M - 30 |
| Tapping [M.S.] | M - 25 |
| Drilling Head | |
| Spindle Nose | M.T.-5 |
| Spindle Nose Outside Diameter | 75 |
| Ram Diameter | 100 |
| Travel of Spindle | 300 |
| Number of Spindle | 10 |
| Speed Min./Mix | 30 - 1500 |
| Number of Power Feeds | 2 |
| Range of Power Feeds | 0.10 + 0.20 |
| Power | |
| Drilling Head | 5 HP |
| Two Speed Motor | 1440 + 2800 |
| Lighting of Arm | 2 HP, 1440 |
| Working Range | |
| Column Diameter | 345 |
| Dist. From Spindle to base min./mix | 400 x 1400 |
| Dist. From Column to center min./mix | 385 x 1450 |
| Drilling Head Travers | 1050 |
| Drilling Radius | 1600 |
| Traverse of Arm | 840 |
| Base Plate | |
| Height of Base Plate | 200 |
| Working Surface | 930 x 1400 |
| Number/Center Dis of T Sloth Length | 3 x 300 |
| Width of Cast Side | 22 mm |
| Overall Dimensions [ L x W x H ] | 2500 x 1200 x 2500 |
| Weight | |
| Approximate | 4000 |